|
|
PCD2-F/PCI Internal PCI to PCMCIA Interface Adapter with Slots in Front Drive Bay Supports PCMCIA 2.1 compliant Type I, II and III 8 bit and 16-bit PCMCIA cards Accepts Type III cards and Type I/II cards at the same time, in the same drive bay PCI Bus Specification 2.1 compliant PCMCIA 2.1 and JEIDA 4.1 compliant Intel 82365SL register and ExCA compatible controller 5V operation Five PCI memory windows and two I/O windows available for each socket. Power saving suspend mode supported ATA disk interface support Automatic flash memory timing supported IRQ steering supported Available with 3.5" internal drive chassis (Optional 5.25" bay adapter available) Supported under Windows 98/ 95 OSR2, NT.4.0, Windows 2000 and Windows Me The PCD2-F/PCI internal PCMCIA interface adapter allows desktop PCs to access the technology used in laptop, notebook, and hand-held computers. Once installed in a standard PCI slot the PCD2-F/PCI can accommodate Type I, II or III PCMCIA devices including memory cards, ATA hard disk cards, modems, and a variety of other PCMCIA I/O devices.
The PCD2-F/PCI is installed into one empty PCI slot and one 3.5" floppy drive bay in the front of the computer (it can be used in a 5.25" bay with the SSD adapter) and provides two PCMCIA sockets. The drive can accept either two Type I or II cards in any combination, or one Type III card and one Type I or II card. This PCD2-F advantage means that both an I/O card such as a modem and an ATA hard disk card can be used at the same time in the same drive bay.
The PCD2-F/PCI supports any combination of 8-bit and 16-bit PC cards powered at 5V. It is register set compatible with the Intel 82365SL controller and is compatible with ExCA.
A unique software configurable interrupt routing circuit and device driver software is provided for Windows 95 OSR2, Windows 98, NT 4.0, Windows 2000 and Windows Me.
|
